hi all. i purchased a DCS-460 recently. the camera looks terrific and operates just fine except it does not recognize when a drive or card is inserted. i have tried a variety of drives and cards.
am i missing any obvious troubleshooting tricks? does anyone have a quick fix to suggest? how difficult would it be for someone technically challenged to repair or replace the faulty component?
thank you in advance for all advice and assistance.
DCS-460 TECHNICAL ASSISTANCE...
-
- Posts: 97
- Joined: Fri Nov 03, 2006 10:34 am
- antispam: No
- Location: England
Hi-welcome to the club
Does the little LCD on the rear show an error number? (eg. E2)
The earlier Kodak SLRs are a bit fussy, for instance none of mine will work with a CF card in a PCMCIA adapter, though are just fine with a PCMCIA flash card or HDD
Jonathan
Does the little LCD on the rear show an error number? (eg. E2)
The earlier Kodak SLRs are a bit fussy, for instance none of mine will work with a CF card in a PCMCIA adapter, though are just fine with a PCMCIA flash card or HDD
Jonathan
DCS serial no. survey
RC-760, EOS-1D & Ds Mk I, II, III, EOS*DCS-3, 5, DCS, DCS-200ci, 420, 460, D1, D1H & X, D2H & X, E2, F, F2, F3, F4, MVC-2000, 5000, 7000, RD-175, 3000, EF 50mm f/1.0, Audi S2, Porsche 911, GSX-R1000 K9
RC-760, EOS-1D & Ds Mk I, II, III, EOS*DCS-3, 5, DCS, DCS-200ci, 420, 460, D1, D1H & X, D2H & X, E2, F, F2, F3, F4, MVC-2000, 5000, 7000, RD-175, 3000, EF 50mm f/1.0, Audi S2, Porsche 911, GSX-R1000 K9